Name: Ardbeg Rollercoaster
SKU: 1380973
Price: 240 GBP
Availability: InStock

Ardbeg Rollercoaster has been created from whisky taken from rare casks from ten different years for a true flavour of Ardbeg's history. It's a veritable cascade of booming peaty chords and tongue tingling sweetness. A limited edition whisky which is to celebrate the tenth anniversary of Ardbeg. The product was initially launched to the Ardbeg Committee in February 2010.

June 2025

July 2025

August 2025

September 2025

October 2025

As you’re reading this blog and are possibly a customer of Just Whisky Auctions, it’s a fair assumption that you’ve visited more than a few distilleries and taken their tour.

That being the case, your guide almost certainly paused to point out the malt mill. More often than not, it’s a Porteus mill, though you might see the occasional Boby and even the odd Buhler mill.

But if it’s painted in a distinctive, unshowy shade of dark red then what you looked at was a Porteus mill (we’ll come back to the Boby mills shortly).  They’re sturdy little things, standing four-square in the mill room, ready to receive another load of malt, quiet occupants of an unobtrusive corner of the distillery that just get on with their job in a modest and understated way.

If the guide didn’t pause and point it out, a Porteus mill would never shout or draw attention to itself, you feel; happy to do an honest day’s work and then await the next consignment of malt to be turned to grist.

At this point, your guide quite probably explained that the mill was quite old and that the Porteus firm had gone out of business, outlived by the durability and simple excellence of a product so good and so enduring that it broke the company.

So well made that they required relatively little maintenance and with little or no demand for new machines both Porteus and Boby closed down many years ago.  They were outlived by their equipment and undone by the slump in whisky production of the 1970s and 80s and the ruthless consolidation of the brewing industry, meaning fewer and fewer small independent breweries.  Sadly, quite a few mills will have been scrapped which, until recently, hasn’t been a problem.

But it’s worth taking a closer look at these tough and functional looking machines and, if you do, there’s a good chance you’ll see a modest plaque somewhere on the side carrying a telephone number and the name Ronnie Lee.

Some years ago I noticed this on Jura and then, shortly afterwards, at Tobermory distillery and then again at a number of Speyside distilleries. So I began asking various guides ‘Who is this Ronnie Lee?’  No one knew – but as soon as I asked some real production people (as opposed to the friendly guides who for the most part are essentially a PR front and equipped with a marketing script) the pieces of a fascinating story fell quickly into place.

Well it turns out that, in a world of tattooed, bearded Brand Ambassadors with their hipster tweed caps, and rock-star Distillery Managers who jet from whisky show to whisky show, Ronnie Lee is a quiet hero. Yet he doesn’t give master classes, doesn’t blog and he’s definitely not part of the fashionable crowd that increasingly follow whisky these days.  But he – together, these days with son Gareth - are the men who mends the mills.  And, if you think about it, without their expertise there would be no whisky.

Working from their modest base near Chepstow, they run Euro Mechanical Engineering working as freelance millwrights.  As such, they spend most of their working days life in maintaining, servicing and, on occasion, restoring Porteus and Boby mills for the brewing and distilling industry.

Their surroundings are as far removed from whisky’s new image of sophistication, glamour and luxury as you might conceivably imagine, yet they carry out vital work as one of an elite group of engineers who keep these vintage machines in working order. Unsung and unheralded, they are essential to the smooth and effective operation of much of the distilling industry, here and internationally.

In fact, they work for Diageo, Chivas Brothers, Glenmorangie, Highland Distillers and Ian MacLeod Distillers, as well as a number of independent breweries and distilleries as far flung as Sweden, Italy and even the USA. If you want a vintage malt mill, or need one restored, Ronnie Lee is the man you call.

And that brings us to a fascinating twist in the story.  Some years ago, Ronnie acquired all the plans for the Boby mill when that firm closed down. With access to that unique archive, it was Euro Mechanical Engineering’s proud boast that, in theory, they could build a brand new Boby-style mill from scratch based on the original blueprints but updated for greater efficiency and cleaner running.

But why would you, when the originals have a working life of a century or more? Well, basically, they are desperately hard to find and with new distilleries and small breweries being built at an unprecedented pace, there’s a need for equipment of established high quality with a proven heritage.  Even the shiniest of new state-of-the-art distilleries may be discreetly supplied by a 50 or 60 year old machine which, come to think of it, is something quite amazingly heart-warming. But there just aren’t enough to go around.

And so it has come to pass that a new Boby mill has indeed been built and is now heading off to its eventual home in a soon-to-be-opened whisky distillery (which is another story, which we’ll come to in a moment).

The mill, of 4-5 tons capacity, is the product of 12 month’s work by Ronnie and Gareth Lee. The original design has been improved, Gareth telling me that while the exterior closely resembles an old-style Boby, the gears have been done away with, the roller bearings switched to a spherical shape and a double-edged synchronized belt fitted. If, like me, that’s double Dutch to you, I’m assured it means cleaner running (no oil), greater energy efficiency and potentially faster running speeds if desired by the operator. Everything has been built from the ground up with a local foundry providing custom-made castings for the bearings, which were then hand finished by Gareth.

But who has commissioned this work and where is this marvel of skillfully modernized vintage engineering to be found? Let’s hear it for the new owners, the family-owned and independent Ian Macleod Distillers, well-known for their Glengoyne and Tamdhu single malts, the imaginative reopening of Rosebank and their Edinburgh Gin brand.  They are also partners in the proposed Laggan Bay project which, if everything goes to plan, will be Islay’s twelfth distillery.

So the Boby is destined for a Hebridean home? Well, no. In fact, it is travelling around 4,000 miles to Una, a town in the southwestern Himachal Pradesh state in northern India where Macleod Distillers are currently building on a greenfield site.  The distillery, expected to be operational later this year, is designed to produce around 1.0m litres of spirit annually of Indian whisky.

Beyond that, Ian Macleod were tight-lipped though my own lengthy on-line research turned up an Environmental Impact report from the Himachal Pradesh State Pollution Control Board.  From that very comprehensive document we learn that “The project proposes to produce Malt Spirit, part of it matured for at least 2 years and above years for supplies to IMFL [that’s Indian-Made Foreign Liquor] industry for blending in various proportions and part of the matured malt spirit will be matured for more than 3 years to be called as Whisky under International norms and bottled as Indian Single Malt whisky for the Indian and export market”.   Indian Single Malt Whisky from Ian Macleod Distillers – that’s something not yet widely reported and quite a feather in the cap of relatively small independent Scottish distillers.

According to the report, the total cost is approximately £5m – quite the bargain by UK standards. 
Naturally I enquired as to the price of the mill and naturally, and quite correctly, Gareth Lee would not be drawn into the specifics. But he did hint that if you wanted one for your project you could expect to wait some 12 months or so (they’re busy) and expect to write a cheque for rather more than  £100,000.

So this is a mill that grinds slowly but is exceeding fine; evidently a labour of love and a source of great pride – and why not, because as Gareth assured me, “it will be working long after I’m in the ground.”  I wonder if in fifty or more years curious visitors will be regaled with the story – I certainly hope so.

Their surroundings are as far removed from whisky’s new image of sophistication, glamour and luxury as you might conceivably imagine

In our inaugural Blog entry, Guest writer Ian Buxton explores the seemingly unglamorous distillery mill. The unsung hero of whisky distilleries.

The Distillery Mill

Historical

In this intriguing piece, Gavin D. Smith delves into the relationship between taxes and the Scotch Whisky industry.

1823 EXCISE ACT

january_auction_live_now_2741159_795586.png

Bidding Ends Monday 19th May

Auction Live Now! Your Next Dram Awaits ...

buy_sell_with_the_worlds_most_trusted_whisky_auction_2080060426f40.png

Worldwide shipping, Incredible selection of Rare & Collectable Malts.

Buy & Sell with The World's Most Trusted Whisky Auction.

sell_with_confidence_in_our_next_auction_november_13th_18th_2080058d35e6c.png

0% Seller Commission. Entry Deadline June 4th. Get in touch now to sell items in this auction!

Sell with confidence in our Next Auction: June 11th - 16th

real_time_valuations_for_your_whisky_20800567ccb49.png

Add bottles to your account for instant valuations of your entire collection.

Real-time Valuations For Your Whisky

time_to_sell_well_collect_your_whisky_for_free_2080055b450b4.png

Free UK courier for collections valued over £500. International courier collections also available.

Time to sell? We'll collect your whisky for free.

main_slider.png

Worldwide shipping available to 65 countries. Express & Insured options available.

Insured worldwide shipping. Delivering whisky, right to your door.

Full Collection & Wooden case (6x70cl)

Johnnie Walker Directors Blend 2008-2013

70 cl

2008 Release

Johnnie Walker The Directors Blend

johnnie_walker_the_directors_blend_2009_release_953787.webp

2009 Release

2010 Release

2011 Release

2012 Release

2013 Release

johnnie_walker_directors_blend_2008_2013_full_collection_wooden_case_6x70cl_2756412_999863.webp

johnnie_walker_directors_blend_2008_2013_full_collection_wooden_case_6x70cl_2756413_167336.webp

johnnie_walker_directors_blend_2008_2013_full_collection_wooden_case_6x70cl_2756414_582733.webp

johnnie_walker_directors_blend_2008_2013_full_collection_wooden_case_6x70cl_2756415_978705.webp

johnnie_walker_directors_blend_2008_2013_full_collection_wooden_case_6x70cl_2756416_838618.webp

johnnie_walker_directors_blend_2008_2013_full_collection_wooden_case_6x70cl_2756417_915931.webp

Please refer to images for fill level, general condition and lot contents.

bowmore_18_years_old_sherriffs_1960s.jpg

26⅔  fl.Ozs

75 Proof

Sherriff's (1960s)

Bowmore 18 Years Old

bowmore_18_years_old_sherriffs_1960s_2755743_268250.webp

bowmore_18_years_old_sherriffs_1960s_2755744_111383.webp

bowmore_18_years_old_sherriffs_1960s_2755745_121371.webp

bowmore_18_years_old_sherriffs_1960s_2755746_136201.webp

bowmore_18_years_old_sherriffs_1960s_2755747_749894.webp

royal_brackla_35_years_old_the_kings_own_whisky.jpg

The King's Own Whisky

Royal Brackla 35 Years Old

royal_brackla_35_years_old_the_kings_own_whisky_2756418_631311.webp

royal_brackla_35_years_old_the_kings_own_whisky_2756419_260465.webp

royal_brackla_35_years_old_the_kings_own_whisky_2756420_900579.webp

royal_brackla_35_years_old_the_kings_own_whisky_2756421_126332.webp

royal_brackla_35_years_old_the_kings_own_whisky_2756422_259087.webp

royal_brackla_35_years_old_the_kings_own_whisky_2756423_813917.webp

ardbeg_21_years_old_2001_angels_share_single_cask_no345_2756447_368960.webp

44% vol

Angel's Share Single Cask No.345

Ardbeg 21 Years Old 2001

ardbeg_21_years_old_2001_angels_share_single_cask_no345_2756448_533168.webp

ardbeg_21_years_old_2001_angels_share_single_cask_no345_2756449_946149.webp

springbank_30_years_old_2024_release_2433_562421.webp

2025 Release (25/13)

Springbank 30 Years Old

springbank_30_years_old_2025_release_2513_2746527_696774.webp

springbank_30_years_old_2025_release_2513_2746528_635498.webp

heavens_door_26_years_old_canadian_whisky_mizunara_finish_bootleg_series_i_75cl_2755507_529224.webp

75 cl

55.7%

Mizunara Finish | Bootleg Series I (75cl)

Heaven's Door 26 Years Old Canadian Whisky

heavens_door_26_years_old_canadian_whisky_mizunara_finish_bootleg_series_i_75cl_2755508_077601.webp

Ardbeg Rollercoaster Exclusive 10th Anniversary Committee Edition

Official Bottling

One of Scotland’s most iconic and recognisable brands, the Ardbeg of today is thanks to a take over by Glenmorangie in 1997. Prior to this it had fallen into a state of disrepair and suffered bouts of closures since the 1980s when the market lost the taste for Islay peat.

The distillery was founded in 1815 by the McDougall family and remained in private hands until the Distillers Company Limited and Hiram Walker bought into the distillery in 1959. In 2004, the parent company was acquired by Louis Vuitton Moet Hennessy who has enjoyed considerable success since. In 2021, to cope with growing demand, a new stillhouse was completed on the Ardbeg shoreline that is home to 2 new pairs of replica stills that will ensure more of its charismatic whisky is available for all of us to enjoy.

Ardbeg Rollercoaster

Exclusive 10th Anniversary Committee Edition

Frequently Asked Questions

How can I bid on the auctions?

Why does the timer extend on a lot?

How do I sell?